Spun depth filters

The Liquapure Range of Spun Depth Polypropylene and Nylon Filters
Image 1

Liquapure is a range of spun depth filters from CFS Ltd offering an economical solution to many filtration requirements. Manufactured in FDA approved Polypropylene or Nylon these filters can provide the guarantee of quality desired without "breaking the bank". However we must always emphasis that for certain applications pleated filters will be preferred. If you use filters from a wide range of manufacturers from Amazon, Osmonics, Pall etc the LIquapure range may offer real advantages and CFS holds one of the largest stocks of this product available. We are not tied to any exact filter length. We provide the standard 10, 20 , 30 and 40 inch filters but if you want a filter 26 inches long or 12 inches long we will provide it, normally same day of order.

Liquapure A is an absolute rated filter cartridge rated at Beta 5000 (99.98% removal efficiency). Available in micron ratings from 0.5 micron to 120 micron and in lengths from 40 inches to any desired lower length. Available in Double open ended "crush fit" style as well and a wide range of end capped versions. This cartridge has a rigid inner core for extra strength. Maximum differential pressure @ 40 deg. C  is 4 bar. Maximum operating temperature is 82 deg C. Nylon option available as well as Polypropylene

Liquapure NT is a nominally rated filter cartridge rated. Available in micron ratings from 0.5 micron to 120 micron and in lengths from 40 inches to any desired lower length. Available in Double open ended "crush fit" style as well and a wide range of end capped versions. This cartridge has a rigid inner core for extra strength. Maximum differential pressure @ 40 deg. C  is 4 bar. Maximum operating temperature is 82 deg C. Nylon option available as well as Polypropylene.

Liquapure N is quality spun depth filter in polypropylene, available in crush fit and end capped versions. Materials are to FDA standards. Liked by many as alternatives to Absolute rated filters.

Liquapure NE  is a low cost nominally rated filter in 1 micron to 20 micron removal efficiencies. Available in crush fit and end capped versions to fit existing housings. Materials to FDA requirements.

End fittings

All the above filters can be provided in the following end fittings:

1        Crush fit double open ended.

2        Code 3  (twin 222 / flat)

3        Code 8 (twin 222 / fin)

4        Code 7 (twin 226 / fin)

5        Code 2 (twin 226 / flat)

6        DOE end capped with seals

End caps can be FDA bonded or fully welded.

BIg Blue equivalents

CFS also holds in stock a large number of the large diameter 10 inch filters similar to the well known "Big Blue"

Packing

Every filter is sterile air flushed and the filter is sealed in a food grade bag for  dispatch. Filters can be branded as desired for OEM manufacturers of maintenance companies. If you want your details on the filter it can be done very easily with no charge.