Filtration is a complex science and should always be treated as such. Forces like direct interception, inertial impaction, gravity and Brownian motion all affect the performance of a filter. Add in differing flow rates, viscosity and binding characteristics with chemical compatibilities and only the most experienced can offer the best advice.   At CFS we aim to offer the most appropriate advice and only by analysing the elements with which we work can we assess the best options in filtration.  Water is, believe it or not, the most difficult liquid to filter as no water from any two sources is the same, therefore the filtration required can vary tremendously.  Why have 40 micron pre filter if the largest particles are no larger than 5 micron and only by critical laboratory support can the correct filtration be recommended.CFS can offer that advice as a part of our service.

This filtration support has a tremendous cost attached to it, and most filtration distributors and even some manufacturers cannot afford the state of the art equipment and personnel to support this service.  CFS Technical and Laboratory Support believes that without this support filters cannot be manufactured and rated correctly and the correct recommendation cannot be made to give the customer the optimum savings and assurance of final product quality. 

It is amazing, did you know a 1 micron filter is no always a 1 micron filter? A filter marked 1 micron could really be 5 micron, 20 micron or even 40 micron! We take away the mystery and give you what you need.